Hakko Electronics Monitouch V Series, Reference Manual, Page: 241 / 746

Chapter 8 Graph Display
8-6
♦
[Setting] Tab Window
[Data Length]
Choose either 1-word or 2-word for the data length of the specified memory.
[1-Word]: word
[2-Word]: double-word
[Type]
Choose either [Standard] or [Deviation].
Standard:
The bar extends from the minimum value toward the maximum
value to the current value.
Deviation: Determine the standard value in the graph. The bar extends
from the standard value to the current value.
[Direction]
Choose from [RGT], [LFT], [UP], or [DW] to select the direction for drawing
the graph.
[Scale]
Specify the minimum and maximum values for the range of the graph.
Negative values can be entered.
[Target Value]/[Standard Value]
When [Standard] is chosen for [Type], the option name reads [Target Value].
When [Deviation] is chosen, it reads [Standard Value]. When the value
changes, choose the PLC memory; when it is fixed, choose [Constant].
* When checking [Alarm] in the [Alarm Setting] tab window, it is not necessary
to set [Target Value].
0 50
50 0
0
50
0
50
0 50
50 0
0
50 0
50