Hakko Electronics Monitouch V Series, Reference Manual, Page: 199 / 746

Chapter 7 Entry Mode
7-8
Entry Dialog Setting
Type: Data Display/Block
♦
[Main] Tab Window
[Division No.] (0 to 255)
Specify the division number. In one division, only one entry mode can be
registered. The parts to be used in entry mode must be placed in the same
division. (
For more information about the division number, refer to
Chapter 2 in the Reference Manual (Operation).)
[Type]
•
Data Display:
Enter data on the data display (Display Function: Entry Target) placed on the
base screen or overlaps though the keypad.
•
Block:
Enter data on the data display (Display Function: Entry Target) placed on the
data blocks though the keypad.
[Command Memory]
This is used for controlling entry mode. The contents depend on the
selection of [Internal] or [External] for [Input Item Select].
A maximum of four entry modes are available on one screen (the base screen and
overlaps 0 to 2).