![background image](http://html1.mh-extra.com/html/hakko-electronics/fn-1010/fn-1010_instruction-manual_3345757012.webp)
10
6-5 Checking “Auto Cal” information
6-6 Setting the load detection function
The HAKKO FN-1010 has the following functions for detecting the tip load.
Load repetition count function:
The number of times a specified load has occurred is counted and stored
in the tip.
Supplied energy calculation function:
The amount of energy emitted during the period in which a load occurred
is calculated.
6-7 Load repetition count alarm
If the specified number of load repetitions has been reached, the load repetition count alarm sounds a buzzer and
vibrates the handpiece.
The count alarm value can be set according to the following procedure. The settable range is – – – – – – (OFF) and
100 to 999,900.
1.
With the normal screen shown, press
the button. The menu screen will
appear. Select
“Auto Cal Info”
and
press the button again.
2.
A list of the calibration results for
the most recent 10 calibrations will be
shown.
To see the details, use the or
button to select the desired calibration
from the list, and then press the
button.
Temp Set
Auto Cal
Auto Cal Info
Tip Info
Load Detection
Preset Temp
Offset Temp
400
℃
→
→
→
OFF
→
00
℃
1. 2018/03/23 17
:
15 P
2. 2018/03/23
17
:
13
F
3. 2018/03/23
17
:
13
F
4. 2018/03/23
17
:
12
F
5. 2018/03/22
11
:
11
P
Calibration Result
List
In the details screen, press the or
button to change the page. After checking
the information, press the button.
1.
With the normal screen shown,
press the button. The menu
screen will appear. Select
“Load
Detection”
and press the
button again.
2.
The screen for setting the load
detection function to ON or OFF will be
shown.
Use the or button to select
“ON”
.
Temp Set
Auto Cal
Auto Cal Info
Tip Info
Load Detection
Preset Temp
Offset Temp
400
ºC
→
→
→
OFF
→
00
ºC
Load Detection
ON
OFF
1.
With the normal screen shown,
press the button. The menu
screen will appear. Select
“Tip
Info”
and press the button again.
2.
The screen for checking and setting tip
information will be shown.
Use the or button to select
“Count Alm”
and press the button.
Temp Set
Auto Cal
Auto Cal Info
Tip Info
Load Detection
Preset Temp
Offset Temp
400
ºC
→
→
→
OFF
→
00
ºC
Shape
Load Count
PWR Time
Count Alm
Load Sensitivity
Tip Solder Type
SerialNo.
T36-D24
000000
00000000:00
OFF
3
LF
*************