1
FM
-20
24
24
V-7
0W
DESOLDER CON
TROL
BOX
1. PACKING LIST
Desolder control box (DCB) ............................ 1
Desoldering tool .............................................. 1
Iron holder ....................................................... 1
Handle (for gun configuration) ......................... 1
Filter pipe assembly ........................................ 1
Cleaning drill (for heating element) .................. 1
Nozzle remover ................................................ 1
Rubber foot ..................................................... 2
Instruction manual ........................................... 1
Please check to make sure that all the items listed be-
low are included:
Desolder control box (DCB)
Desoldering tool
(Nozzle is not included)
Handle (for gun configuration)
Cleaning drill (for heating element)
Nozzle remover
Iron holder
2. SPECIFICATIONS
Desolder control box
Power consumption
12 W
Output
24 V
Vacuum generator
Ejector type
Vacuum pressure (max.)
93 kPa (700 mmHg) (28 in. Hg)
Suction flow
28
ℓ
/min.
Tip to ground potential
< 2 mV
Applied air pressure
490 kPa (5.0 kgf/cm
2
) when in
use (trigger or button is pressed)
Compressed air
consumption
1.62 c.f.m. (46
ℓ
/min.)
Outer dimension, less
cord
4.7 (W)
×
1.8 (H)
×
6.8 (D) in.
(119
×
45
×
172 mm)
Weight
2.6 lb. (1.2 kg)
Desoldering tool
Power consumption
70 W (24 V)
Temperature range
650 - 840°F (350 - 450°C)
Tip to ground potential
< 2 mV
Tip to ground resistance
< 2
Ω
Length, less cord
7.09 in. (180 mm)
Weight, less cord & hose
0.14 lb. (65 g)
Length of cord
4 ft. (1.2 m)
NOTE
The temperatures were measured using the Hakko 192
soldering tester.
This product is protected against electrostatic discharge.
Specifications and design are subject to change without notice.
Rubber foot
Filter pipe assembly
