38
HAKKI PILKE RAVEN 33
TRANSLATION
VERSION 1
WASHING AND CLEANING
4.11
Loose debris and sawdust can be cleaned from the machine with pressurised air, for example. The machine can
also be washed with a pressure washer, as long as the water jet is not aimed directly at the bearings or electrical
equipment.
Always ensure that the machine and the working area are sufficiently clean during operation. The machine must
always be cleaned after use. Clean the machine as necessary, and always before storing the machine for a pro-
longed time. After washing, the machine must be lubricated according to the instructions in Section 4.11.
STORAGE
4.12
The firewood processor must be stored on a level and solid foundation. Although the machine is intended for
outdoor use, it should be covered and stored in a sheltered location or indoors. Before prolonged storage, the
machine must first be cleaned, then washed according to Section 4.12 and lubricated according to Section 4.10.
MAINTENANCE TABLE
4.13
Item
Task
Daily
Interval
50 t
Interval
500 h
Sub-
stance/accessory
item
Multiplier gear
oils
(PTO model only)
Check (leaks)
1st change
Subsequent
X
X
X
SAE 80/90 approx.
0.1 l
See Section 4.8.
Hydraulic oil
Normal condi-
tions
Check
1st change
Subsequent
X
X
X
Amount approx.
40 l
Such as Teboil S 32
Oil filter
Always when
changing oil
HEK02-20.077-AS-
SPO25-VM-B17-B
Spare part num-
ber:
97290
Cutting blade
Sharpen as neces-
sary
0.325” 66/1.5
Spare part num-
bers:
Chain: 95148
Bar: 95145
Machine
Clean
Wash
X
Electric motor
Cleaning
X
Electrical equip-
ment
Clean/check visu-
ally
X
Winch and strap Check
X
Lubrication
(section 4.9)
Lubrication/check X
Lubricant
such as multi-
purpose grease