25
HakkiPilke 50 Easy
Version 1.2 2012
A new splitting motion begins when the cutting blade
rises from the bottom position and the above phases
are repeated.
5.2.2.
Maintaining the splitting
mechanism
Problem:
The splitting beam does not stay in the initial
position and is constantly pushed slowly down.
Fault:
The valve's jointed lever A is not in the middle
position.
How to fix:
Adjust the bolt that centres the jointed
lever A. It rests against the trigger rod C.
Problem:
The machine performs the splitting motion
on its own.
Fault:
The head of the trigger rod C or the bolt in the
jointed rod A has rounded and can no longer hold the
jointed lever A in the middle position.
How to fix:
Even out the contact surfaces of the rod
and bolt with a file, for example. Then, adjust the
jointed lever A to the middle position, as in the
previous paragraph.
Figure 24. The splitting mechanism
returns
Figure 25. The splitting mechanism back
in the initial position
