�� p�� ��� �� 2017 be�� � s�b���
2017. szeptember 7. 14:22:21
��
p��
��� �� 2017 be��
� s�b���
2017. szeptember 7. 14:22:21
2
�� p�� ��� �� 2017 be�� � s�b���
2017. szeptember 7. 14:22:21
��
p��
��� �� 2017 be��
� s�b���
2017. szeptember 7. 14:22:21
3
22
IDE...F ErP • IND...F ErP
2. ACCESSORIES
When receiving the product, please, check the packaging for the following acces
-
sories (1 pc of each one):
•
Instructions for installation and use
•
Guarantee document
•
List of Service Stations
•
Energy label
•
Product information sheet
3. PRINCIPLE OF OPERATION
Indirect (INDxxx ErP Sztea) and indirect electrically heated (IDExxxF ErP Sztea)
hot water tanks can be operated using:
electricity, solar energy, gas, coal or oth
-
er energy sources. Closed system indirect (IND...) and indirect electrically heat
-
ed (IDE...) hot water tanks can supply hot water to one or more water with
-
drawing locations within households or institutions. The hot water obtained is
suitable for both cleaning and drinking purposes. However, having regard to the
fact that hot water has a higher capacity to dissolve metals, it is recommended
to use cold water for cooking and drinking, and consume it after heating, when
hot water is needed. The water is of drinking water quality, if it complies with the
limit values laid down in Government Decree No. 201/2001 (X.25.). After reach
-
ing the factory set temperature, heating is automatically turned off by the tem
-
perature regulator (for IDExxxF Erp Sztea types). Thus, hot water can be ob
-
tained from the storage tank for a long time. The polyurethane heat insulation
surrounding the inner tank prevents the fast cooling of the water, thus ensur
-
ing the availability of hot water from the container over a long time. Due to the
design of the container, hot water is discharged unmixed. The corrosion protec
-
tion of the inner tank is ensured by a special enamelling and active anodes. The
enamelled design ensures long service life, even in the case of aggressive waters.
4. MOUNTING AND INSTALLATION OF THE TANK
The mounting (4) of the hot water tank, as well as its connection to
the water (5) and electrical network (6) and commissioning must be
performed by a qualified professional according to our instructions and
observing the standards IEC 60364 / MSZ HD 60364.
In case of improper connection and installation,
you will lose all your guarantee and warranty
rights!
Summary of Contents for IDE75F ErP
Page 45: ...3 45 RO...
Page 60: ...2 60 IDE F ErP IND F ErP 10 2...
Page 63: ...3 63...
