No
Question
Solution
1
How to connect encoder?
Connect encoder with computer directly via net cable.
2
How to access to encoder?
Set up one constant IP including IP: 192.168.1.1**, then access to
192.168.1.168 on PC browser.
3
How to watch the TS stream from the encoder?
Copy the streaming URL to VLC - Media- Open network stream- paste, enjoy
it.
4
How to use RTSP?
1 Enable RTSP on the user interface, and watch it on VLC with same step to last question.
2.
Enter RTSP address to your server
5
How to use UDP Unicast and RTP?
Enter your Unicast IP and RTP IP address, then you can watch it on the server
or on VLC.
6
How to set up display resolution?
To set up the “encoded size” on the user interface , then click “apply”
7
How to set up bitrate?
To
set up the output” Bitrate” on the user interface, then click “apply”
8
How to set up” IP address” of the encoder?
To set up the IP address at “ Network” function on the user interface, new
address works after “apply” and “reboot” the device
9
How to do RTMP streaming live?
You will get your streaming URL and key once created the live streaming
function on the platform, then enter the full address on the RTMP option, if
use ip mode, separate each part via”/”.
10
How to set up my logo on the video?
logo size: 1920*1080
；
2M
；
BMP: 24, name: logo.bmp, 2
nd
logo name:
logo_ext.bmp, upload the logo at”main/ 2
nd
OSD setting” on the” extended”,
adjust the coordination and “apply”
11
Not smooth on the platform?
1 The problem of the platform.
2 Network unable to afford the bit, lower required.
12
Failed to use RTMP?
1 Network ip address not matched.
2 upload speed unable to upload the stream
13
How to makes encoder works on RTMP
transmission?
Set up the same segment to the computer, and another available IP address.
22
