manualshive.com logo in svg

Haivision S/B-292E-DVI, User Manual, Page: 62 / 420

Share
Download
Haivision S/B-292E-DVI User Manual Download Page 62

Installing the Encoder 

Hardware Maintenance

Makito

 

X User’s Guide, v2.2, Issue 02

62

Figure 2-14

RTC Battery Removal and Installation

6.

Remove the battery by pulling it upward from the PCB.

7.

Clean the surface of transformer T1 with alcohol if there is glue residue.

8.

Peel off the protective layer on the tape on the new battery.

9.

Press the new battery onto the PCB (top of transformer T1) with a force of 3 pounds-
force per square inch for three (3) seconds.

10.

Reconnect the battery connector.

11.

Reassemble the chassis, reconnect any external devices to the appliance, and 

reconnect the power to the appliance.

(5) Disconnect battery connector

(6) Remove 

      battery /

(7) Clean surface

(8) Peel off tape

(9) Press new battery

     onto PCB

(10) Reconnect battery connector

     (TransformerT1)

Summary of Contents for S/B-292E-DVI





































































































































































































































































































































































































































Reviews:

No comments