Haivision S/B-292E-DVI, User Manual, Page: 356 / 420

CLI Command Reference
stream
Makito X User’s Guide, v2.2, Issue 02 356
SRT
(see “Configuring Secure Reliable Transport (SRT)”
on page 133
)
mode caller
Specifies the SRT Connection Mode:
• caller
• listener
• rendezvous
See
“Configuring Secure Reliable Transport
(SRT)” on page 133.
sourceport auto
(SRT connection mode must be caller)
Specifies the UDP source port for the SRT
stream.
encryption none
( encapsulation must be
ts-srt
) Enables AES
encryption and specifies the key length,
either: none, AES-128, or AES-256
passphrase n/a
(Only required and accepted if
encryption
is
enabled, encapsulation must be
ts-srt
)
Specifies a string used to generate the
encryption keys to protect the stream.
Range = 10-79 UTF8 characters
latency 125
( encapsulation must be
ts-srt
) Specifies the
SRT receiver buffer that permits lost packet
recovery. The size of this buffer adds up to the
total latency. A minimum value must be 3
times the round-trip-time (RTT).
Range = 20 - 8000 ms
NOTE:
Latency is for the SRT protocol only
and does not include the capture, encoding,
decoding and display processes of the end-
point devices.
overhead 25%
( encapsulation must be
ts-srt
) Specifies the
maximum stream bandwidth overhead that
can be used for lost packets recovery.
Range = 5-100%
Parameter Default (Cont.) Description/Values (Cont.)