Haivision S/B-292E-DVI, User Manual, Page: 322 / 420

CLI Command Reference
passthrough
Makito X User’s Guide, v2.2, Issue 02 322
passthrough
S
YNOPSIS
passthrough start
passthrough stop
passthrough set parameter=value [parameter=value …]
passthrough get [config, stats, all]
passthrough clear
enable_passthrough_on_serial_port
D
ESCRIPTION
On the Makito X with SDI, you can enable bi-directional serial passthrough for controlling
serially attached devices such as PTZ controlled cameras. Both RS-232 and RS-422 are
supported. The
passthrough command is used to manage passthrough settings.
A
CTIONS
start
Starts listening for passthrough clients.
stop
Stops passthrough and disconnects any clients that were
connected.
set
Configures passthrough settings.
A series of one or more
parameter=value
pairs can be
specified at once. See passthrough Parameters below.
get
Displays passthrough information.
You can specify configuration, stats, or all information.
TIP:
To display a summary of all the encoders in a table format,
you can use
passthrough all get table
.
clear
Clears passthrough statistics.
help
Displays usage information for the
passthrough
command.
enable_passthrough_on_serial_port
Enables passthrough from the serial port.