Haivision S/B-292E-DVI, User Manual, Page: 105 / 420

Managing the Encoder
Configuring Metadata Capture
Makito X User’s Guide, v2.2, Issue 02
105
TIP
To save the current configuration, open the
A
DMINISTRATION
> P
RESETS
page. See
“Saving and Loading Presets” on page 178.
Configuring Serial Metadata Sources
NOTE
The Makito X auto-detects the hardware setup of the encoder and automatically
creates the source if the serial port is connected.
You can configure the Makito X SDI to extract either KLV or CoT metadata packets from
the serial port. You must specify the Data Format , and for CoT metadata, the Max AirCraft-
SPI Delta .
To configure the Serial metadata source:
1.
From the Metadata List View, click the link for the Serial metadata source.
The Edit Metadata Source page opens for the selected source.