manualshive.com logo in svg

Haivision Makito, User Manual

Share
Download
Haivision Makito User Manual Download Page 99

Managing the Encoder 

Configuring Media Effects

Makito User’s Guide, v2.1.0, Issue 01

99

Configuring Media Effects

From the 

M

EDIA 

S

ETTINGS

 page, you can configure media effects such as a logo overlay in 

the encoded video and a static image to replace the encoded video stream when the stream 
is paused. You can also take snapshots of your video input.

NOTE  

The maximum file size for logo and still image files is 10 MB.

Logo Insertion/Overlay

You can configure the Makito to display a graphic file as a logo overlay in the encoded 
video. There can be one logo per Makito. The image file can be uploaded in either BMP, 
JPEG, PNG, or GIF format. The logo position can either be relative (top left, top right, 
centered, etc.) or absolute (positioned at the exact X and Y coordinates specified). 

To configure a logo overlay:

1.

Click 

S

YSTEM

 from the main menu, and then click 

E

NCODER

>M

EDIA

 from the sub-

menus.

The 

M

EDIA 

S

ETTINGS

 page opens, as shown in the following example.

Summary of Contents for Makito







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands