Managing the Encoder
Configuring the Audio Settings
Makito User’s Guide, v2.1.0, Issue 01
77
Configuring the Audio Settings
From the
A
UDIO
S
ETTINGS
page, you can configure Audio Encoding properties such as the
Input connector and Audio Bitrate for the encoder.
HiLo Audio Streaming
You may optionally configure the encoder for “HiLo” audio streaming, in which the
Makito encodes a single input and simultaneously sends both a “High” and “Low” audio
stream to two different destinations (comparable to
). The audio
Input, Sampling Rate, and Level are common to both streams, while the audio Bitrate,
Channels (Mode), and AAC-LC Algorithm must be specified for the first encoder instance
in the “High” column and the second encoder instance in the “Low” column.
To configure the Encoder Audio Settings:
1.
Click
S
YSTEM
from the main menu, and then click
E
NCODER
>A
UDIO
from the sub-
menus.
The
A
UDIO
S
ETTINGS
page opens, displaying the current audio encoding settings, as
shown in the following example.
2.
Select or enter the new value(s) in the appropriate field(s). See
