Installing the Encoder
Hardware Maintenance
Makito User’s Guide, v2.1.0, Issue 01
56
Hardware Maintenance
The following maintenance tasks are recommended for the Makito appliance.
Cleaning the Ventilation (Intake/Outtake) and Filter
To clean the intake and outtake vents, use a dry cloth or an aspiration device approved for
electronic equipment.
Maintenance should be done every 6 months (more often in a dusty environment).
Monitoring of the Fan Operation
There is no system level monitoring of the fan operation; however, you can check to see if
the fan is operating in one of two ways:
•
If the appliance is easily accessible, turn the unit over and listen (an operational fan
makes a humming noise).
•
Use the CLI (
temperature get
command) to get information from the built-in
temperature sensors. For details, see
temperature of the unit is rising, that is an indication that the fan may not be operating
properly.
