Installing the Encoder
Setting Up the Encoder
Makito User’s Guide, v2.1.0, Issue 01
33
Setting Up the Encoder
Always read the instructions carefully and keep this User’s Guide for future reference.
Please choose a suitable location for operating the encoder(s). By doing so you will
preserve long lifesaving and stability of the unit(s).
Set up the encoder on a reliable and flat surface when using the single Makito chassis, or
mount in a rack, when using the 1U (MB6) or 4U (MB21) chassis.
CAUTION
The MB21 chassis must either be installed on a securely fastened rack shelf,
or fastened directly to the rack using support brackets. For instructions on how to properly
secure or support the MB21, refer to the MB21 Important Notice (provided in the package
and available through Haivision’s Download Center).
Safety First
Please pay particular attention to the following points in order to help protect yourself and
the encoder:
•
Refer to
•
The Makito is an indoor appliance and should be kept in a dry, dust free environment.
•
There are no user-serviceable parts inside the unit. Making unauthorized changes will
void the warranty.
•
Only connect the unit to a compatible power source.
•
If an electrical fault occurs, disconnect the unit and contact Haivision Technical
Support.
•
Never try to force the connections when setting up the system as this may damage the
unit.
•
The MB21 and MB6-AC chassis have more than one power supply cord. Disconnect
both (2) power supply cords before servicing to avoid electric shock.
