Haivision Makito User Manual Download Page 190

Page: 190 / 294

CLI Command Reference

banner

Makito User’s Guide, v2.1.0, Issue 01

190

banner

YNOPSIS

banner enable
banner disable
banner install <bannerfile>
banner get
banner delete

ESCRIPTION

The

banner

command is used to manage the Advisory Notice and Consent Banner. This is

a single text file that will be displayed to users who log in for interactive sessions on the
Makito.

NOTE

The

banner

command can only be used by the Administrator.

In the current release, only ASCII file format is supported for the banner file; the maximum

file size for the banner is 4KB.

CTIONS

BANNER

ARAMETERS

Parameter

Default

Description/Values

n/a

The name of the .txt file to display as the

Advisory Notice and Consent Banner for the

encoder.

enable

Enables display of the installed Advisory and Consent Banner
page at login (a banner must be installed).

disable

Disables display of the current Advisory and Consent Banner
page at login.

install

Installs a text file as the Advisory and Consent Banner page.

NOTE:

On CLI the text file must be locally stored on the device

before it’s installed.

get

Displays banner status information.

delete

Deletes the banner file from the system.

bannerfile

Summary of Contents for Makito







































































































































































































































































































Search results

Summary of Contents for Makito

Reviews:

Brands by name

Popular brands

Haivision Makito, User Manual

Search results

Summary of Contents for Makito

Reviews:

Brands by name

Popular brands