Managing Users and Security
Saving and Loading Configurations
Makito User’s Guide, v2.1.0, Issue 01
126
Saving and Loading Configurations
NOTE
The
C
ONFIG
page is only accessible to administrators.
Configuration Management
Each Makito is configured by users’ selecting and setting values of applicable system
settings, such as Encoder settings and the stream destination. Although these configuration
settings are not automatically saved, you can save a list of text-based configuration direc-
tives in a file which is stored in the encoder’s flash memory. Saved configuration settings
will continue to be used after a reboot, or when the unit is turned off and on.
You can then direct the system to read this configuration file to restore these settings when
the system startup process performs the configuration autoload.
From the
C
ONFIG
page, you can view the list of saved configurations, load a saved config-
uration, and save the current settings as a configuration file. You can also view the contents
of a configuration file, delete configurations, and select the configuration file to load at
startup.
To view and manage configurations:
1.
Click
A
DMINISTRATION
from the main menu and then click
C
ONFIG
from the submenu.
The
C
ONFIG
page opens displaying the list of saved configurations for the encoder, as
shown in the following example.
