Haivision Makito X4 Installation Manual Download Page 7

www.haivision.com

Makito X4 Encoder 1.1

Makito X4 Rugged Encoder Installation Guide

7

Generated on: 2024-02-08 22:26:05

HVS-ID-IG-MX4ER-11, Issue 01

EMC Warnings

Notice with respect to Class A (FCC)

Changes to equipment without the permission of Haivision may result in its failure to comply with the 
FCC requirements for Class A digital devices. If applicable, your rights to use the equipment may be 
limited by the FCC rules and you may be able to remedy, at your own expense, any interference with 
radio or television equipment. This equipment has been tested and found to comply with the limits for a 
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference that may occur when the equipment is used in a 
commercial environment. This equipment generates, uses and can radiate radio frequency energy. If not 
installed and used in accordance with the instruction manual, it may cause harmful interference to radio 
communications. Use of this equipment in residential areas may cause harmful interference. If necessary, 
users will have to resolve these issues at their own expense.

Avis relatif aux appareils de classe A (FCC)

Toute modification de l'équipement sans l'autorisation de Haivision peut entraîner sa nonconformité aux 
exigences de la FCC concernant les appareils numériques de classe A. Le cas échéant, vos droits 
d'utilisation de l'équipement seront susceptibles d'être limités par les règlements de la FCC et vous 
pourrez être amené à remédier, à vos frais, aux éventuelles interférences avec des dispositifs 
radiophoniques ou télévisuels. Cet équipement a été testé et jugé conforme aux limites d’un périphérique 
numérique de classe A en vertu de la partie 15 des règlements de la FCC. Ces limites ont pour but de 
fournir une protection raisonnable contre les interférences nuisibles susceptibles de se produire, lorsque 
l'équipement est utilisé dans un environnement commercial. Cet équipement génère, utilise et peut 
émettre de l'énergie radioélectrique. S'il n'est pas installé ni utilisé conformément au 
manuel d'instructions, il peut provoquer des interférences nuisibles aux communications 
radio. L'utilisation de cet équipement dans les zones résidentielles est susceptible de causer 
des interférences nuisibles. Le cas échéant, les utilisateurs devront résoudre ces problèmes à leurs frais.

Notification for Class A (Canada)

This Class A digital apparatus complies with Canadian ICES-003.

Notification pour les appareils de classe A (Canada)

Cet appareil numérique de Classe A est conforme à la norme NMB-003 du Canada.

Safety instructions for Class A for CISPR32

WARNING:

 This product is a Class A product. In a domestic environment, this product may cause radio 

interference, in which case the user may need to take appropriate measures.

Consigne de sécurité relative à la Classe A pour CISPR32

ATTENTION:

 Il s'agit d'un produit de Classe A. Dans un environnement domestique, ce produit peut 

entraîner des perturbations radioélectriques, auquel cas l'utilisateur devra  éventuellement prendre des 
mesures adéquates.

Summary of Contents for Makito X4








































Reviews: