Haivision Makito X4 Installation Manual Download Page 37

www.haivision.com

Makito X4 Encoder 1.1

Makito X4 Rugged Encoder Installation Guide

37

Generated on: 2024-02-08 22:26:05

HVS-ID-IG-MX4ER-11, Issue 01



Terms of Service Agreement

Copyright
Trademarks
Third Party License Information

Copyright

© 2015-2023 Haivision. All rights reserved.

This edition and the products it describes contain proprietary and confidential information. No part of this 
content may be copied, photocopied, reproduced, translated or reduced to any electronic or machine-
readable format without prior written permission of Haivision. If this content is distributed with software 
that includes an end-user agreement, this content and the software described in it, are furnished under 
license and may be used or copied only in accordance with the terms of that license. Except as permitted 
by any such license, no part of this content may be reproduced, stored in a retrieval system, or 
transmitted, in any form or by any means, electronic, mechanical, recording, or otherwise, without the 
prior written permission of Haivision Systems, Inc. Please note that the content is protected under 
copyright law even if it is not distributed with software that includes an end-user license agreement.

Trademarks

The Haivision logo, Haivision, and certain other marks are trademarks of Haivision. CoolSign is a 
registered trademark licensed to Haivision Systems, Inc. All other brand or product names identified in 
this document are trademarks or registered trademarks of their respective companies or organizations. 

Third Party License Information

UDT4, 4.11, UDP-based Data Transfer, Permissive free software license.

Copyright (c) 2001 - 2011, The Board of Trustees of the University of Illinois. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided 
that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and 
the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions 
and the following disclaimer in the documentation and/or other materials provided with the 
distribution.
Neither the name of the University of Illinois nor the names of its contributors may be used to 
endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY 
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 

Summary of Contents for Makito X4








































Reviews: