www.haivision.com
Makito X4 Encoder 1.1
Makito X4 Rugged Encoder Installation Guide
28
Generated on: 2024-02-08 22:26:05
HVS-ID-IG-MX4ER-11, Issue 01
Analog Audio/Serial Input Connector
The Makito X4 Rugged analog audio/serial interface provides two (2) mono audio input signals and
one mono audio output (for talkback, future use). The talkback output impedance is 75
Ω (
Ohms). The
signal level is 1 Vrms (or 2.2 dBu) (single ended).
The audio input channels support 48-kHz sample rates with 16-bit PCM data. The audio input channels
support up to Vrms (or 2.2 dBu) (single ended) inputs.
The input impedance of the audio input channels
is 33 kOhms.
The analog audio/serial interface also provides four (4) serial signals and one serial ground. The serial
connector supports RS-232 and RS-422 operation.
Analog Audio/Serial Connector
On Unit
Mating Connector
Manufacturer
Hirose
Hirose
Connector
Type
Audio/Serial
Connector
Audio/Serial
Connector
Part Number
LF13WBRB-20S
LF13WBP-20P
Analog Audio/Serial Connector Pinout
Cont
act
#
Description
SERIAL (DTE)
*as shown on
Wiring Diagram
RS-232
Connection
s
RS-485/422
Connections
1
RXD-A
Rx
Rx+
2
RXD-B
N/C
Rx-
3
TXD-Z
Tx
Tx-
4
TXD-Y
N/C
Tx+
5
N/C
6
N/C
7
SERIAL GND
8
N/C
9
FACTORY RESET SIGNAL
10
FACTORY RESET GND
AUDIO
11
AUDIO OUT CHANNEL (for talkback, future use)
12
AUDIO OUT CHANNEL GND (for talkback, future
use)
13
AUDIO IN CHANNEL 2 (unbalanced only)
14
AUDIO IN CHANNEL 2 GND (unbalanced only)
15
N/C
16
N/C
17
AUDIO IN CHANNEL 1 (unbalanced only)
18
AUDIO IN CHANNEL 1 GND (unbalanced only)
19
N/C
20
N/C