www.haivision.com
Makito X4 Encoder 1.1
Makito X4 Rugged Encoder Installation Guide
19
Generated on: 2024-02-08 22:26:05
HVS-ID-IG-MX4ER-11, Issue 01
3.
4.
5.
6.
Under Content, type a Name for the stream, and under Source, select the encoder you started
in
step 4
(above).
Under Broadcasting, select
TS over UDP
for the Protocol.
Under Destination, type in a valid multicast Address (e.g.,
239.192.2.3
) and Port number
(e.g.,
2000
).
To add metadata to the stream, select the Metadata source, and (optionally) select the
encapsulation type (Data Carriage).
Note
The Multicast address range is from
224.0.0.0
to
239.255.255.255
. Multicast addresses
from
224.0.0.0
to
224.0.0.255
are reserved for multicast maintenance protocols and
should not be used by streaming sessions. We recommend that you use a multicast address
from the Organization-Local scope (
239.192.0.0/14
).