www.haivision.com
Makito X1 Rugged Encoder 1.0
Makito X1 Rugged Encoder Installation Guide
7
Generated on: 2024-02-08 21:18:37
HVS-ID-IG-MX1E-10, Issue 02
1.
2.
3.
•
•
Installing the Makito X1 Rugged Encoder
Always read the instructions carefully and keep this guide for future reference.
To install the appliance:
Fasten the appliance to its support base with four screws (size M2.5 or 4-40, not included).
Or you can use two stainless steel, harsh-environment cable ties (up to 250 mils wide), which can
be passed through slots in the chassis.
Fasten a grounding wire (10 AWG minimum) to the grounding lug using the screw and lock washer
provided.
Topics Discussed
Connecting to the Network and Audio/Video Sources
Powering up the Makito X1 Encoder
Caution
The surface temperature of the chassis can reach 95°C in poorly ventilated environments.
We recommend that you fasten the appliance to a metal (cold) plate to increase heat
dissipation. In add cases, adequate temperature management is required to dissipate 6
Watts of power continuously.
Caution
The chassis must be properly grounded in order to provide protection against lightning
strikes and other power surges.