www.haivision.com
Makito X1 Rugged Encoder 1.0
Makito X1 Rugged Encoder Installation Guide
18
Generated on: 2024-02-08 21:18:37
HVS-ID-IG-MX1E-10, Issue 02
2.
3.
4.
5.
To add an output stream, click the
Add
button.
The New Stream page opens.
Under Content, type a Name for the stream, and under Source, select the encoder you started in
Step #4
(above).
Under Broadcasting, select
TS over UDP
for the Protocol.
Under Destination, type in a valid multicast Address (e.g.,
239.192.2.3
) and Port number
(e.g.,
2000
).
Note
The Multicast address range is from
224.0.0.0
to
239.255.255.255
. Multicast addresses
from
224.0.0.0
to
224.0.0.255
are reserved for multicast maintenance protocols and
should not be used by streaming sessions. We recommend that you use a multicast address
from the Organization-Local scope (
239.192.0.0/14
).