www.haivision.com
Makito X1 Rugged Encoder 1.0
Makito X1 Rugged Encoder Installation Guide
10
Generated on: 2024-02-08 21:18:37
HVS-ID-IG-MX1E-10, Issue 02
6. (Optional) To capture analog audio, connect the encoder’s
Audio/Serial
connector to your audio
source(s) using the the audio/serial breakout cable, shown in the previous step.
•
•
Note
The Reset button provides two options:
If you press and hold the button for less than 4 seconds, the system resets and loads the
last saved "startup" configuration. If no configuration was previously saved as the startup
preset, the default settings prevail.
If you press and hold the button for more than 4 seconds, the module performs a
complete factory reset. It clears all of the previously configured settings, including IP,
streams and encoder configurations.
Note
As of Release 1.1.1, the Makito X1 Rugged supports two (2) input channels of analog audio. To
configure analog audio, see
.