www.haivision.com
Makito X1 Rugged Encoder 1.0
Makito X1 Rugged Encoder Installation Guide
1
Generated on: 2024-02-08 21:18:37
HVS-ID-IG-MX1E-10, Issue 02
•
•
•
Makito X1 Rugged Encoder Installation Guide
Makito X1 Rugged Encoder 1.0
This Installation Guide provides the steps required to install and configure the Makito X1 Rugged Video
Encoder to stream to your compatible decoding device. This guide covers the Makito X1 appliance (#S-
MX1E-R-SDI1-ISR) and the Evaluation Kit (#
S-MX1E-R-SDI1-DK, available upon request
)
Please refer to the
Makito X1 Rugged Encoder User's Guide
for detailed configuration and
operation information, as well as technical specifications.
We recommend that you familiarize yourself with this guide before installing your encoder.
Use the following guidelines when unsafe conditions exist or when potentially hazardous voltages are
present:
Always use caution and common sense.
To reduce the risk of electrical shock, do not operate equipment with the cover removed.
Repairs must be performed by qualified service personnel only.
Improper handling and/or installation practices of sensitive equipment may VOID the warranty.
Waste Electrical and Electronic Equipment (WEEE)
Disposal
In accordance with the European Union (EU) WEEE Directive, Haivision products that fall within
the scope of the WEEE, are labeled with the above symbol, and customers are encouraged to
responsibly recycle their equipment at the time of disposal. Haivision also offers its customers
the option of returning Haivision equipment to facilitate its environmentally sound disposal.
For more information, please visit our website at:
https://www.haivision.com/environment
.
Caution
When handling components, or when setting switch options, always use an antistatic wrist strap
connected to a grounded equipment frame or chassis.
If a wrist strap is not available, periodically
touch an unpainted metal surface on the equipment.
Never use a conductive tool, such as a
screwdriver or a paper clip, to set switches.