manualshive.com logo in svg

Haivision Makito X, User Manual, Page: 311 / 404

Share
Download
Haivision Makito X User Manual Download Page 311

CLI Command Reference 

passthrough

Makito X User’s Guide, v2.0, Issue 01

311

passthrough

S

YNOPSIS

passthrough start
passthrough stop
passthrough set parameter=value [parameter=value …]
passthrough get [config, stats, all]
passthrough clear

D

ESCRIPTION

On the Makito X with SDI, you can enable bi-directional serial passthrough for controlling 
serially attached devices such as PTZ controlled cameras. Both RS-232 and RS-422 are 
supported. The 

passthrough

 command is used to manage passthrough settings. 

A

CTIONS

PASSTHROUGH 

P

ARAMETERS

start

Starts listening for passthrough clients.

stop

Stops passthrough and disconnects any clients that were 
connected.

set

Configures passthrough settings. 

A series of one or more 

parameter=value

 pairs can be 

specified at once. See 

passthrough Parameters

 below.

get

Displays passthrough information. 

You can specify configuration, stats, or all information.

TIP:

 To display a summary of all the encoders in a table format,            

you can use 

passthrough all get table

. 

clear

Clears passthrough statistics.

help

Displays usage information for the 

passthrough

 command.

Parameter

 Default

 Description/Values

 

standard

RS232

Specifies the transceiver mode for the 
passthrough:

• RS232

• RS422

NOTE: 

Only valid for the serial port.

Summary of Contents for Makito X





















































































































































































































































































































































































































Reviews:

No comments