manualshive.com logo in svg

Haivision Makito X, User Manual, Page: 24 / 404

Share
Download
Haivision Makito X User Manual Download Page 24

Introduction 

Product Overview

Makito X User’s Guide, v2.0, Issue 01

24

Figure 1-8

Makito XR (Ruggedized) (Quad SDI Encoder Appliance)

NOTE  

For details on the Makito X Harsh or Makito XR, please refer to the following 

documents available through Haivision’s Download Center:

• Makito X Harsh Installation Guide

• Makito XR (Ruggedized) Installation Guide

HEVC Encoding

The Makito X HEVC encoder is designed to support extreme low-latency broadcast and 
intelligence surveillance reconnaissance (ISR) applications. Features include:

•

Live Video Backhaul

 - From Anywhere Transport the highest quality, lowest latency, 

live video over any network with the Makito X HEVC encoder. 

•

More Content - Less Operational Cost 

With HEVC and Haivision’s SRT (Secure 

Reliable Transport) support, the Makito X HEVC encoder makes low-cost, readily 
available public Internet connections secure and reliable for high quality live video 
transport, while saving bandwidth yet maintaining H.264 picture quality. 

•

Performance Encoding with Metadata 

In ISR applications, many full motion video 

(FMV) systems bundle additional information with video streams in the form of 
metadata. The Makito X HEVC optimizes the task of disseminating information in 
formats required by downstream networks, exploitation systems, and viewers, with the 
lowest possible delay, while preserving and enhancing metadata with frame accurate 
synchronization.

See 

“Makito X HEVC Encoder, Rear View (#S-292E-SDI2-HEVC)”

 on page

 22

Summary of Contents for Makito X





















































































































































































































































































































































































































Reviews:

No comments