Haivision Makito X, User Manual, Page: 145 / 404

Managing the Encoder
Configuring Recording Outputs
Makito X User’s Guide, v2.0, Issue 01 145
Recording Settings
The following table lists the Recording controls and settings:
Recording Setting Default Description/Values
File
Name
n/a Enter a unique name for the recording. This
can be any string that follows standard file
naming conventions and must be defined
at the recording session start time.
NOTE:
This name is merged with the
recording start date/time of the asset
segment to create the asset file name.
File Format
TS Select the file format for the recording,
saved directly into a file either:
• TS (Transport Stream): MPEG-2 TS/ISO
13818-1 format. Supports audio/video &
metadata.
• MP4: formatted as per ISO 14496-12, 14
and 15. Only supports audio/video, no
metadata.
TS Settings
Auto-Assign Available if the File Format is TS.
See “Transport Stream Settings” on
page 135
Create CC File
disabled Check this checkbox to create a serial file
(.srt) containing the captured closed
captions. This file can be used by some
players to replay the captions with the
recorded content.
Time & Size
Recording Limit
None Specifies either a size limit or a time limit for
the recording:
• (None)
• Time: Specify the time limit in hours and
minutes.
• Size: Type in the size limit and select
either MB, GB or TB.
Recording
Segmentation
None Specifies either a size limit or a time limit for
recording segments.
• (None)
• Time: Hours and Minutes
• Size: Type in the size limit and select
either MB, GB or TB