Home
/
Haivision
/
Makito X
/
User Manual

Haivision Makito X, User Manual, Page: 132 / 404

Share

Page: 132 / 404

Haivision Makito X User Manual Download Page 132

Managing the Encoder

Configuring Streaming Outputs

Makito X User’s Guide, v2.0, Issue 01

132

CDN and Flash Interoperability (RTMP)

The Makito X can stream directly to a Flash Media Server (FMS) or Flash-based Content
Delivery Network (CDN) using the Real Time Messaging Protocol (RTMP).

•

The supported RTMP servers are FMS and Wowza.

•

The supported Transcoders are Wowza and Haivision’s KulaByte Transcoder.

•

The supported CDNs are Akamai and Limelight.

This section provides the steps to set up an RTMP stream.

To stream to a Flash Media Server or Flash-based CDN:

1.

Follow the steps in

“Setting Up Streaming”

122 to add a stream and select the

sources.

2.

From the Outputs Detail View, set the Stream Protocol Type to RTMP (as shown in
the following example).

3.

For the Destination Address, type in the URL for the application endpoint of the FMS
or CDN server.

«
...
130
131
132
133
134
...
»

Summary of Contents for Makito X





















































































































































































































































































































































































































Reviews:

No comments