manualshive.com logo in svg

Haivision Makito X, User Manual, Page: 123 / 404

Share
Download
Haivision Makito X User Manual Download Page 123

  Managing the Encoder 

Configuring Streaming Outputs

Makito X User’s Guide, v2.0, Issue 01

123

3.

To configure multi-track audio, click 

Add

 next to the Audio field and select the next 

Audio Encoder to add to the stream.

IMPORTANT  

Audio sources should always be associated with the same video 

interface for the dual channel SDI encoder. Selecting Analog or SDI audio sources 
that do not originate from the same video source is 

not

 recommended as audio 

artifacts will result at the decoder. For example, selecting video from BNC1 and audio 
from BNC2 will cause audio artifacts. Analog audio must be associated with a single 
BNC input.

Summary of Contents for Makito X





















































































































































































































































































































































































































Reviews:

No comments