Managing the Encoder
Configuring Video Encoders
Makito X User’s Guide, v2.0, Issue 01
98
TimeCode Source
The following table provides the list of possible TimeCode sources when “Video” is
selected:
NOTES:
•
The digitized version of VITC (referred to as D-VITC) is not supported. Only
ATC_VITC (Ancillary Timecode) is supported.
•
Although LTC (Linear Timecode) and VITC timecodes may be present at the same
time, the current release only supports VITC and LTC ancillary packets will be
ignored.
Video Encoder Statistics
The following table lists the Video Encoder statistics:
Input Type
Possible TimeCode Source(s)
CVBS Input signal
1) VITC (The timecode is extracted from the Vertical
Interval TimeCode of the incoming video signal).
SD/HD/3G-SDI
1) MISB 0605 KLV micro-second timestamp (if KLV is
enabled)
2) ATC_VITC
3) MISB 0601 KLV micro-second timestamp (if KLV is
enabled)
4) System Time clock
NOTE:
The one to be carried is chosen based on the
time difference between the timecode STC (System
Time Clock) and the coded picture.
Video Encoder Statistic
Description/Values
State
The current operating status of the encoder, either:
• WORKING
• STOPPED
Up Time
(only available when State is WORKING) The length of
time the encoder is actively encoding (e.g.,
1d22h5m41s).
Input Present
Indicates whether an input signal has been detected
from the video source: Yes / No