manualshive.com logo in svg

Haivision Makito X, User Manual, Page: 64 / 404

Share
Download
Haivision Makito X User Manual Download Page 64

Installing the Encoder 

Hardware Maintenance

Makito X User’s Guide, v2.0, Issue 01

64

Hardware Maintenance

The following maintenance tasks are recommended for the Makito X appliance. 

Cleaning the Ventilation (Intake/Outtake) and Filter

To clean the intake and outtake vents, use a dry cloth or an aspiration device approved for 
electronic equipment.

Maintenance should be done every 6 months (more often in a dusty environment).

Cleaning or washing the filter is applicable on specific equipment.

Monitoring of the Fan Operation

There is no system level monitoring of the fan operation; however, it is recommended that 
you check to see if the fan is operating in one of two ways:

•

If the appliance is easily accessible, turn the unit over and listen (an operational fan 
makes a humming noise).

•

Use the CLI (

temperature get

 command) to get information from the built-in 

temperature sensors (see 

“temperature”

 on page

 

352). If the internal temperature of the 

unit is rising, that is an indication that the fan may not be operating properly.

Replacing the MB6X Chassis Fan Tray

Some MB6X chassis models have a removable fan tray, located on the far right side of the 
chassis. The fan tray may be removed from the front of the chassis. This procedure applies 
to those units supporting field swappable fan trays. 

NOTE  

You can replace the fan tray without powering off the Makito X, which allows you to 

perform this maintenance procedure without stopping the encoder service. 

However, do so only if you are able to replace the fan tray within five minutes. Otherwise, 
we recommend that you power off the unit before replacing a fan tray. 

Summary of Contents for Makito X





















































































































































































































































































































































































































Reviews:

No comments