Haivision Makito X User Manual Download Page 59

Page: 59 / 404

Installing the Encoder

Powering Up the Unit

Makito X User’s Guide, v2.0, Issue 01

MB6X (6-Slot) Chassis

The MB6X chassis is available in three power supply types:

•

MB6X-RAC: Redundant AC Power supply (Dual-Input, Dual-Power supply)

•

MB6X-MED: Medical Grade AC power supply, Non-Redundant (Single-Input, Single
power supply)

•

MB6X-DC: DC Power supply, Non-Redundant (Single-Input, Dual-Power supply)

WARNING

To prevent electric shock, do not remove the cover of the MB6X chassis.

There are no user-serviceable parts inside. The MB6X chassis is to be installed and
serviced by qualified personnel only.

Figure 2-13

MB6X-RAC Chassis Rear View showing Power Connectors

Figure 2-14

MB6X-MED Chassis Rear View showing Power Connector

PSU Power On/Off Switches

AC Power Receptacles

PSU Status LEDs (green)

PSU Fault LEDs (red)

PSU Power On/Off Switch

AC Power Receptacle

Summary of Contents for Makito X





















































































































































































































































































































































































































Search results

Summary of Contents for Makito X

Reviews:

Haivision Makito X, User Manual, Page: 59 / 404

Search results

Summary of Contents for Makito X

Reviews: