manualshive.com logo in svg

Haivision Makito X, User Manual, Page: 58 / 404

Share
Download
Haivision Makito X User Manual Download Page 58

Installing the Encoder 

Powering Up the Unit

Makito X User’s Guide, v2.0, Issue 01

58

TIP  

To ensure redundancy, each power input should be connected to a different 

120/240V circuit and be isolated.

The PSU Status LED will turn green indicating that the chassis is powered up (only if 
all four Power On/Off switches are On).

In the front of the chassis, the Makito X Status LEDs will start blinking green, indicat-
ing that the encoders are booting up. 

4.

Wait until the Status LEDs stay solid green, indicating that the encoders are ready for 
operation. 

CAUTION  

The power supply cords are used as the main disconnect devices on the 

MB21B chassis. Therefore, ensure that the socket-outlet is located/installed near the 
equipment and is easily accessible. 

The MB21B chassis has more than one power supply cord. Be sure to disconnect both (2) 
power supply cords before servicing to avoid electric shock.

To begin configuring video streams, you can either open the Web interface, or log in to the 
CLI. 

•

To use the Web interface, see 

“Logging In to the Web Interface”

 on page

 73.

•

To enter CLI commands, see 

“CLI Command Reference”

 on page

 242.

Summary of Contents for Makito X





















































































































































































































































































































































































































Reviews:

No comments