Haivision Makito X User Manual Download Page 359

Page: 359 / 404

CLI Command Reference

videnc

Makito X User’s Guide, v2.0, Issue 01

359

resizemode

Scale

Cropping results in an output resolution
where instead of downscaling, that sub-
resolution from the input format is cropped.

Crops the input and encodes to a rectangle
within the input image (at the center of the
image) while discarding the rest of the input
image.

• Scale: Input is scaled to output resolution.

• Crop: The output resolution is the portion of

the input that is encoded from the center.

NOTE:

Available only if

resolution

is not Auto

960, or 1440.

For more information, see

“Cropping”

page

92.

gopsize

120

The Group of Pictures size for the encoded
video.

1..1000

NOTE:

For intra-refresh mode, the GOP size

is the number of frames between the
sequence and picture parameter set NAL
transmission.

gopstructure

The GOP structure for the encoded video:
(See

“Framing”

on page

93)

•

I frames only (lowest delay; lowest

quality)

•

IP:

I and P frames only

•

IBP:

I, B and P frames (H.264 only)

•

IBBP:

I, BB (two B frames in sequence)

and P frames (highest delay; highest
quality) (H.264 only)

NOTE:

B frames require a Main Profile

decoder.

B frames provide more quality as the
encoding is more efficient; thus more details
can be rendered in the same
bandwidth/bitrate.

Parameter

Default (Cont.)

Description/Values (Cont.)

Summary of Contents for Makito X





















































































































































































































































































































































































































Search results

Summary of Contents for Makito X

Reviews:

Haivision Makito X, User Manual, Page: 359 / 404

Search results

Summary of Contents for Makito X

Reviews: