Haivision Makito X, User Manual, Page: 342 / 404

CLI Command Reference
stream
Makito X User’s Guide, v2.0, Issue 01 342
videopid 33
(Optional) Video Packet Identifier.
16..8190
audiopid 36
(Optional) Audio Packet Identifier.
16..8190
For MPEG-2 TS streams, the audio PIDs for
each audio source can be assigned explicitly.
The order of PID assignment is the same as
the
audiosrc
parameters. e.g.:
audiosrc=0,1,3 audiopid=64,65,66
will
result in the audio elementary stream from
audio source
0
being assigned an elementary
PID of
64
, etc.
datapid 40
(Optional) Data (metadata) Packet Identifier.
16..8190
prcpid 34
(Optional) (Program Clock Reference) Packet
Identifier. Timestamp in the TS from which the
decoder timing is derived.
16..8190
pmtpid 32
(Optional) (Program Map Table) Packet
Identifier.
16..8190
program 1
(Optional) Program Identifier used in the
Program Map Table (PMT) of the TS stream.
0..65535
tsid 0
(Optional) Transport Stream ID. Identifies the
transport stream in the Program Association
table (PAT) of the TS stream.
0..65535
stillimage n/a
(Optional) Specifies the filename of a static
image that will replace the “real” video stream
when streaming is paused.
NOTE:
The static image file must already
have been converted into a file containing an
encoded single H.264 GOP sequence. You
can either use the
mkstill command, or the
Web interface S
TILL
I
MAGES
page
(
see
“Configuring Still Image Streaming” on
page 162).
Still Image insertion when pausing a stream is
not supported when a HEVC/H.265 video
encoder is selected as a content source.
Parameter Default (Cont.) Description/Values (Cont.)