Haivision Makito X User Manual Download Page 331

Page: 331 / 404

CLI Command Reference

snapshot

Makito X User’s Guide, v2.0, Issue 01

331

CTIONS

SNAPSHOT

ARAMETER

take

Takes a snapshot from either:

• the current active video (Makito X DVI, S/B-292E-DVI or Makito

X SDI single-BNC, S/B-292E-HDSDI1)

• the video received on any input port, where ID is the video input

(Makito X SDI dual-BNC, S/B-292E-HDSDI2). ID is either

for

BNC-1 or

for BNC-2.

You can optionally specify the format and image quality per
snapshot, as well as the filename.

set

Sets system-wide defaults for the preferred snapshot format and
quality.

get

Displays the current format and quality defaults for the snapshot
utility.

list

Displays the available snapshots on the system along with the
resolution.

Snapshot files are stored under

/usr/share/haivision/snapshots

delete

Deletes either the snapshot specified by

or all

snapshots stored under

/usr/share/haivision/snapshots

Parameter

Default

Description/Values

format

jpeg

Specifies the image format: yuv, jpg

When saving in jpg format, you can specify the
desired image quality.

NOTE:

YUV snapshots always have the best

possible quality but take the most amount of
space.

quality

100

Specifies the desired image quality from 1
(lowest) to 100 (highest).

1..100

NOTE:

This setting only applies for jpg

snapshots.

location

Internal

Flash

Specifies the storage location, either:

• flash - Internal on-board NAND flash

• ssd - SATA Solid State Drive

• sd - Secure Digital card

• usb - Universal Serial Bus Mounted media

• nfs - Network file system

Summary of Contents for Makito X





















































































































































































































































































































































































































Search results

Summary of Contents for Makito X

Reviews:

Haivision Makito X, User Manual, Page: 331 / 404

Search results

Summary of Contents for Makito X

Reviews: