manualshive.com logo in svg

Haivision Makito X, User Manual, Page: 318 / 404

Share
Download
Haivision Makito X User Manual Download Page 318

CLI Command Reference 

policy

Makito X User’s Guide, v2.0, Issue 01

318

POLICY 

P

ARAMETERS

Parameter

 Default

 Description/Values

 

crypto

compliance

None

Specifies the required cryptographic 
compliance, either:

• None

• NDPP11: Activates cryptographic security 

to a level compliant with the Network 
Device Protection Profile v1.1.

• FIPS140: All management cryptography is 

operated in the FIPS 140-2 mode.

• Sp800-52r1: All management cryptography 

follows the guidelines of NIST Special 
Publication 800-52 Rev 1.

NOTE: 

Either selection reinforces security for 

all management functions of the encoder in 
terms of cryptography. This setting takes 
effect upon the next reboot.

sslv3

See 

NOTE:

 

Enables or disables SSLv3 as a supported 
TLS version: Yes, No

NOTE: 

SSLv3 is disabled on factory new 

systems. On upgraded systems, SSLv3 is 
enabled only if upgrading a system where no 
(None) cryptographic compliance is 
configured. SSLv3 can be enabled only if 

compliance

 is set to None. 

Specifies which TLS (Transport Layer Security) versions are accepted from the HTTPS 
client. At least one TLS version must be enabled.

tlsv1.0

Yes

Enables or disables TLSv1.0 as a supported 
TLS version: Yes, No

tlsv1.1

Yes

Enables or disables TLSv1.1 as a supported 
TLS version: Yes, No

tlsv1.2

Yes

Enables or disables TLSv1.2 as a supported 
TLS version: Yes, No

password

quality

Basic

Specifies the required password strength, 
either:

• Basic

• Strong

Summary of Contents for Makito X





















































































































































































































































































































































































































Reviews:

No comments