Haivision Makito X User Manual Download Page 189

Page: 189 / 404

System Administration and Storage

Managing Licenses

Makito X User’s Guide, v2.0, Issue 01

189

To select the license file, click

Install

and select the file in the Open File dialog box.

When you see the filename in the text box, click

Upload

TIP

To select a different license file, click

Change

. To remove the selection, click

To apply your changes, click

Reboot

The encoder will reboot and you will be returned to the Login page.

To view an installed license file, click the file in the list.

The license file opens in a separate window.

To delete a previously installed license, select the file in the list and click

Delete

Summary of Contents for Makito X





















































































































































































































































































































































































































Search results

Summary of Contents for Makito X

Reviews:

Haivision Makito X, User Manual, Page: 189 / 404

Search results

Summary of Contents for Makito X

Reviews: