manualshive.com logo in svg

Haivision Makito X, User Manual, Page: 177 / 404

Share
Download
Haivision Makito X User Manual Download Page 177

System Administration and Storage 

Installing Firmware Upgrades

Makito X User’s Guide, v2.0, Issue 01

177

Installing Firmware Upgrades

IMPORTANT  

We recommend that upgrades to a new version occur in a stepwise 

fashion (i.e., 1.0.x -> 1.1.x -> 1.2.x -> 1.3.x -> 1.4.x -> 1.5.x).

NOTE  

On SDI appliances/blades (#S/B-292E-HDSDI2), prior to upgrading to Version

 2.0, 

please verify that the CPLD is version 4 or greater (Web Interface > Status page or CLI  

haiversion

 command). If it is 

not

 at least version 4, contact Haivision Technical Support. 

When you first receive the Makito X, the necessary firmware is pre-installed on it. 
Upgrades of the firmware are issued through Haivision’s Download Center on our website 
at: 

http://www.haivision.com/download-center/

.

Please note that you may download the latest firmware and documentation by registering 
via the Haivision Support Portal.

When a firmware upgrade becomes available, you can easily install it from the Web inter-
face. You will first need to copy the upgrade file to your local computer or network. 

The firmware upgrade comes in the form of a file with the extension 

.hai

, which when 

loaded will replace the application on your Makito X. The firmware upgrade components 
are digitally signed, and these signatures are all verified before performing the installation.

This section provides instructions to install a firmware upgrade from the Web interface.

To install a firmware upgrade:

1.

On the Administration page, click 

U

PGRADE

 from the sidebar menu. 

The Upgrade page opens, as shown in the following example.

2.

Click 

Browse

 and select the file in the Open File dialog box. 

Summary of Contents for Makito X





















































































































































































































































































































































































































Reviews:

No comments