Haivision Makito X, User Manual, Page: 141 / 404

Managing the Encoder
Configuring Streaming Outputs
Makito X User’s Guide, v2.0, Issue 01 141
Path Max Bandwidth
Estimated link bandwidth. This can change due to
cross traffic.
RTT
Measured Round Trip Time.
Buffer
Encoder buffers in milliseconds. SRT encoder buffers
are unacknowledged stream packets (reception not
confirmed by the receiver/decoder). The encoder
buffer in absence of congestion or packet lost is
around the RTT value. In presence of recoverable
packets lost, the value should be between the RTT
and Latency. Encoder buffers above Latency will most
probably have an impact on the decoder and affect
the user’s experience.
Latency
Maximum of the decoder and encoder configured
(Buffering) Latency . For example:
Encoder Configured SRT Latency = 750
Decoder Configured SRT Latency = 20
The SRT Stats Latency (which is the current SRT
connection applied Buffering Latency) = 750 (largest
of the two).
At startup, handshake exchanges the value
configured on both sides and the largest one is
selected.
The decoder default is set to the minimum (20ms) so
it can be completely controlled from the encoder side.
Streaming Statistic Description/Values (Cont.)