Haivision Makito X, User Manual, Page: 139 / 404

Managing the Encoder
Configuring Streaming Outputs
Makito X User’s Guide, v2.0, Issue 01 139
Streaming Statistics
The following table lists the Streaming statistics:
RTMP only
Publish Name
n/a (RTMP only) Enter a publish name for the
stream (512 characters maximum).
A stream publishing name is required for
RTMP streaming. If you do not enter a
publish name, the stream name will be
used instead.
NOTE:
Note that stream names must be
unique, while the publish name can be re-
used if desired across multiple RTMP
streams. See
“CDN and Flash
Interoperability (RTMP)” on page 132.
Username
n/a Enter the CDN login username.
Password
n/a Enter the CDN login password.
n/a These buttons become available to control
a stream once it has started streaming
(after you click
Apply
).
• Click Stop to stop an active stream. You
can later restart it or clear it.
• Click
Pause
to pause the stream. If a Still
Image When Paused has been
configured, it will be displayed. You can
later resume the stream or stop it.
• Click Start to restart a stopped stream.
n/a Click
Statistics
to view statistics for the
stream. See “Streaming Statistics” on
page 139.
Streaming Statistic Description/Values
State
The current operating status of the stream, either:
• STREAMING
• STOPPED
• PAUSED
Up Time
(only available when State is STREAMING) The
length of time the stream is actively streaming (e.g.,
1d22h5m41s).
SSRC
(RTP only) The synchronization source.
Streaming Setting Default (Cont.) Description/Values (Cont.)