manualshive.com logo in svg

Haivision Makito X, User Manual, Page: 125 / 404

Share
Download
Haivision Makito X User Manual Download Page 125

  Managing the Encoder 

Configuring Streaming Outputs

Makito X User’s Guide, v2.0, Issue 01

125

7.

Under Broadcasting, select the Protocol. See 

“Protocol”

 on page

 135.

8.

To configure the Transport Stream settings (for TS over UDP, RTP, or SRT), click 

TS 

Settings

 and enter the values. See 

“Transport Stream Settings”

 on page

 135.

9.

Enter the values for the Destination and Link Parameters. See 

“Broadcasting”

 on 

page

 135.

10.

To configure a stream using the SRT (Secure Reliable Transport) streaming protocol, 

select TS over SRT for the Protocol and then complete the additional fields under 
Connection and SRT Settings. See 

“Configuring Secure Reliable Transport (SRT)”

 on 

page

 130.

Summary of Contents for Makito X





















































































































































































































































































































































































































Reviews:

No comments