Managing the Encoder
Configuring Streaming Outputs
Makito X User’s Guide, v2.0, Issue 01
120
Configuring Streaming Outputs
From the Outputs pages, you can set up either streaming only, recording only, or both
streaming with recording. This section covers setting up streaming.
NOTE
Recording is only available on the Makito X with Storage dual-height model. The
available configuration settings are specific to this model. For information on recording,
see
“Configuring Recording Outputs”
Recording is
not
available on HEVC-capable appliances.
Outputs List View
To open the Outputs List View:
1.
On the Streaming page, click
O
UTPUTS
from the sidebar menu.
The Outputs List View opens, displaying the list of defined streams for the encoder, as
shown in the following example (Makito X with Storage).
The Outputs List View displays the status LED, Stream Name, Protocol, Destination
(IP Address and Port), and selected Content (Video/Audio Encoders and Metadata
source) for each stream. It also provides an option for you to either start, stop, pause,
or delete the stream.
•
To create an output stream or recording session, click
Add
.
Click a link to open the Detail View
Click to add a stream
Click links to view current configuration