Haivision Makito X User Manual Download Page 110

Page: 110 / 404

Managing the Encoder

Configuring Metadata Capture

Makito X User’s Guide, v2.0, Issue 01

110

If CoT has been installed, select CoT for the Data Format (under Input Settings).

Select or enter the remaining value(s). For details on the Metadata fields, see

“Metadata Settings”

on page

116.

(Optional, CoT/UDP or CoT/Serial metadata only) To set up CoT retransmission, see

“Configuring CoT Retransmission”

on page

112.

(Optional) To configure a mission ID or security data to replace or insert, see

“Configuring KLV Metadata Insertion”

on page

114

To apply your changes and start the Metadata stream, click

Apply

The changes will take effect immediately but will not be saved and will be lost after a
reboot

Summary of Contents for Makito X





















































































































































































































































































































































































































Search results

Summary of Contents for Makito X

Reviews:

Haivision Makito X, User Manual, Page: 110 / 404

Search results

Summary of Contents for Makito X

Reviews: