manualshive.com logo in svg

Haivision Kraken CR, Installation Manual, Page: 13 / 14

Share
Download
Haivision Kraken CR Installation Manual Download Page 13

Kraken CR Installation Guide

Technical Specifications

HVS-ID-IG-KRAK-CR-26, Issue 01

Page 13 of 14

Technical Specifications

Encoding

Transcoding (cont)

Video Processing

Video Input:

Input Metadata: 

De-interlacing 

Composite NTSC/PAL 

KLV or CoT over serial RS-232 

Down Scaling 

SD-SDI SMPTE 259-M 

KLV or CoT over IP 

Aspect Ratio Preserved 

HD-SDI SMPTE 292M, 274M, 296M 

KLV over HD-SDI

Configurable Frame Rate 

Optional QSV HW Acceleration

Transcoding

Output H.265/HEVC: 

Sources:

Main Profile 

Networking

IP MPEG-2, H.264 or HEVC input

Up to Level 4 (720p30)

Single Program Transport Stream 
(SPTS) 

MJPEG from L-3 Vortex 

MPEG Transport Stream or SRT

Unicast/Multicast

Up to 6Mbps 

TS over UDP 

Input H.265/HEVC:

Transport Stream Shaping, VBR 

Session Announcement (SAP) 

Up to Level 4 (1080p30) 

Main Profile 

Output H.264/AVC: 

Management

MPEG Transport Stream, SRT or RTSP

Baseline, Main, High Profile

Web User Interface (HTTPS) 

Up to 10Mbps 

Up to Level 4 (1080p30) 

REST API 

CBR, VBR

MPEG Transport Stream or SRT

Console UI

Up to 10Mbps 

Input H.264/AVC: 

Transport Stream Shaping, VBR 

Appliance

Up to Level 4.2 (1080p60) 

Weight: 

Baseline, Main, High Profile 

Output Audio: 

2.6 lbs (1.18 Kg) 

MPEG Transport Stream, SRT or RTSP

AAC 2 channel 

Dimensions: 

Up to 20Mbps 

Audio Sync Preserved 

44.45mm H x 124.968mm W x 
213.868mm D 

CBR, VBR

(1.75” H x 4.92” W x 8.42” D) 

Metadata (Processing): 

Input MPEG-2: 

CC 608/708 pass-through

Power: 

MainProfile@MainLevel (SD) 

CoT to KLV conversion 

12-28VDC, 45W 

MainProfile@HighLevel (HD) 

CoT Relay 

100-240VAC external locking power 
supply 

MPEG Transport Stream 

Insertion and KLV edits 

Up to 20Mbps 

KLV pass-through 

Temperature: 

SMPTE 336M compliant 

Operating: 0º to 50ºC (32º to 122ºF) 

Input Audio: 

MISB 0601 compliant

Non-Operating: -40º to 50ºC (-40º to 
122ºF) 

MPEG1 Layer 2 

AAC 2 channel and 5.1 

Summary of Contents for Kraken CR















Reviews:

No comments