Managing Users and Security
Managing Audits
Makito
X User’s Guide, v2.2, Issue 02
233
5.
If TLS is selected as Transport, choose the type of audit server to be accepted as a
trusted server: either All (no server authentication), CA-signed, or Self-signed.
If Trusted Servers is set to CA-signed, the root-CA certificate of the audit server cer-
tificate chain must be imported in the encoder (see
225) for the TLS connection to succeed.
6.
If Trusted Servers is set to Self-signed, copy the Fingerprint string from the Audit
server’s certificate and paste it in the Fingerprint field under Audit Settings to identify
the certificate trusted for this TLS connection.
The fingerprint should be that of the certificate that belongs to the audit server which
was set in “Audit Server Address”.
7.
To apply your changes, click
Apply
.
Audit Settings
The following table lists the Audit controls and settings:
Audit Setting
Default
Description/Values
Enable Audit
disabled
Check or clear this checkbox to enable or
disable audits for the system.
Audit Server
Address
n/a
Type in the address and port of the remote
server, in one of the following formats:
•
fqdn[:port]
•
ipaddr[:port]
•
hostname[:port]
If the port is not provided, the default port
for the chosen
