Managing the Encoder
Configuring Metadata Capture
Makito
X User’s Guide, v2.2, Issue 02
118
Metadata Settings
The following table lists the encoder Metadata controls and settings:
NOTE
The fields depend on the hardware setup of the encoder; i.e., whether the serial
port or SDI video is connected; UDP is always available.
Metadata Setting
Default
Description/Values
Metadata Source Name
Name
n/a
Enter a unique name for the source.
Type
Network
Select the type of metadata source to create.
●
Network or
●
HD-SDI
NOTE:
Additional HD-SDI sources can be
created to stream KLV over SDI at different
rates.
HD-SDI Input
BNC-1
(HD-SDI source only) Select the Input port
for the metadata source.
●
BNC-1
●
BNC-2
Decimation Settings (HD-SDI only)
Decimation
None
(Optional) For KLV over SDI metadata input,
the ingested KLV messages can be frame-
decimated to reduce the bandwidth used by
the metadata service. Select either the
decimation factor or a reference encoder to
match its video frame rate.
●
None
●
By Factor:
1/2..1/60
NOTE:
1/2
means divide the amount by
half, etc.
●
With Encoder: Select a video encoder
from the drop-down list and the metadata
AU rate will match the video encoder
frame rate.
