Haivision F-MB21B-R User Manual Download Page 105

Page: 105 / 420

Managing the Encoder

Configuring Metadata Capture

Makito

X User’s Guide, v2.2, Issue 02

105

TIP

To save the current configuration, open the

DMINISTRATION

> P

RESETS

page. See

“Saving and Loading Presets”

on page

178.

Configuring Serial Metadata Sources

NOTE

The Makito

X auto-detects the hardware setup of the encoder and automatically

creates the source if the serial port is connected.

You can configure the Makito

X SDI to extract either KLV or CoT metadata packets from

the serial port. You must specify the

Data Format

, and for CoT metadata, the

Max AirCraft-

SPI Delta

To configure the Serial metadata source:

From the Metadata List View, click the link for the Serial metadata source.

The Edit Metadata Source page opens for the selected source.

Summary of Contents for F-MB21B-R





































































































































































































































































































































































































































Search results

Summary of Contents for F-MB21B-R

Reviews:

Haivision F-MB21B-R, User Manual, Page: 105 / 420

Search results

Summary of Contents for F-MB21B-R

Reviews: